Program For Evaluating Postfix Expression Using Stacking. May 15, 2010 Setting up USB 2TB NTFS Samba share. No one heard of NTFS-3g? Install optware or some ipkg system, and run ipkg install ntfs-3g However.

Author Message GPSJane DD-WRT Novice Joined: 01 Feb 2011 Posts: 39 Posted: Wed Jan 16, 2013 16:04 Post subject: NAS on Buffalo router and dd-wrt Hi all I am really struggling to set up file sharing from a hdd on my router. I would like a Samba file share and then I would like Optware installed so I can use Twonky. I am not at all experienced with Linux but I am comfortable enough with learning as long as I can read up about it.

Turbo Vac 800 Dual Action User Manual there. I own one, never upgraded the HDD, but here is a detailed link on how to do it: It isn't rejecting it as such, you need to initialize the new disk I believe with the firmware which is stored in a partition on the disk, need to clone the disk I believe the piece you are looking for (dependent on your model) is at the bottom of the page: New Generation -, There are several ways, but it is not that easy as with the older boxes. Just putting in a blank drive and updating the firmware does not work as the Firmware updater does not find the box. Because in contrast to the older boxes everything but the bootloader(UBoot) is on the hdd. So even EM Mode got implemented via an initrd in /boot (=/dev/sda1). Cloning the first partition and flashing This way works because you need the first partition (/boot = /dev/sda1) so you can boot to EM Mode • Follow until you have the hdd in your hand • Connect the HDD to a pc, also connect the new HDD to it.